Electrical part of ceramics

Through unique property profile YOU gain almost limitless potential

Use MOWITAL® polyvinyl butyral for YOUR tailor-made high performance ceramics (HPC)

In electrical parts and screen printing

MOWITAL® polyvinyl butyral grades are outstanding temporary binders for the manufacture of high performance ceramics (HPC) to be used in solid oxide fuel cells, piezo ceramics, substrates or low temperature co-fired ceramics, and in passive components such as capacitors, inductors or resistors. The extremely high purity makes MOWITAL® most suitable for these special applications. MOWITAL® grades are highly recommendable as temporary binders for production of conductive pastes (screen printing process). During the sintering process, MOWITAL® combusts with virtually no residue.

Or metal pastes like in multilayer ceramic capacitors (MLCC)

MOWITAL® is acting as binder having already dispersing properties for the conductive metals. It is yielding paste (for internal electrode) which can be co-fired with green tapes in laminated ceramic substrates like multilayer ceramic capacitors (MLCC). Actually, the trend is towards thin films and conductor paths. Using MOWITAL® as binder for both, the ceramic green tapes reach best compatibility during co-firing and good dimensional stability before and after firing is observed.

And extraordinary functions in tape casting

MOWITAL® is a temporary binder especially suitable for the manufacture of high performance single and multi layer ceramics. It is compatible with organic substances used in ceramic slurries. The polar as well as non-polar chemical structure of MOWITAL® enables to produce flexible green tapes with high tensile strength and good elongation behaviour that can be lifted from launching material such as PET films or metal without damage. During laminating in multilayer processes MOWITAL® supports the fusion of green-tape layers.

In any case we will reach tailor-made solution together with you.

 

PROPERTIES

  • excellent dispersion of ceramic particles
  • soluble in organic solvents
  • excellent film formation
  • fast solvent release
  • good green sheet stabilization
  • burns out residueless

 

Use MOWITAL® for

  • ceramic made by solvent-based processes (tape-cast processes for MLCC, alumina substrates)
  • solid fuel cells as temporary and permanent binder
Screenshot of the download pdf "battery solutions"

 

BATTERY SOLUTIONS

Three issues commonly encountered with

Binders for Ceramic Electrodes

  • Defect rate during production is too high
  • Long-term reliability of the battery is not sufficient
  • A binder with suitable physical properties is not available

Learn how our Binders can overcome: Download „Battery Solutions“ AND use the contact form!

Contactbox: Gurshranjit Singh | Technology Scouting of the Mowital® Brand

Call For Experience

Gurshranjit Singh

Technology Scouting
Phone: +49 69 305 85729
E-Mail: gurshranjit.singh@kuraray.com

 

 

or use our contact form 

Contact