MOWITAL Technology Scouting:
MOWITAL® in der Welt der Wissenschaft
Erfahren Sie, wie die fortschrittlichen PVB-Lösungen des MOWITAL-Teams Innovationen in wichtigen Anwendungsbereichen vorantreiben, darunter ballistischer Schutz, 3D-Druck, Festoxid-Brennstoffzellen (SOFC), Klebstoffzwischenschichten für Verbundwerkstoffe und nachhaltige Materialien. Entdecken Sie die überragende Leistung, Zuverlässigkeit und Umweltfreundlichkeit, die MOWITAL® zur ersten Wahl für die Weiterentwicklung dieser Spitzentechnologien machen.
Unsere ausgewählte Forschungsliste bietet bahnbrechende Einblicke - von neuartigen Verbundwerkstoffsystemen bis hin zu Elektrolyten der nächsten Generation.
Entdecken Sie unter den nachstehenden Links, wie MOWITAL die Zukunft der Materialinnovation vorantreibt!
Nachfolgende Inhalte stehen nur in englischer Sprache zur Verfügung.
A new generation of aramid fibers/poly (vinyl butyral) composites for ballistic protection: Recent development and advances.
Summarizes the latest developments in aramid fiber/PVB composites for ballistic applications, highlighting improvements in impact toughness, energy absorption, current trends, and potential use cases.
Published in Journal of Engineered Fibers and Fabrics, Volume 19
Development of Novel Durable Solid Oxide Electrolysis Cells.
Describes the development of robust Solid Oxide Electrolysis Cells (SOECs) with innovative Ni-GDC fuel electrodes. Aims at enhancing lifespan and performance for sustainable hydrogen production.
Thesis for PhD, Published by DTU, Department of Energy Conversion and Storage
Characterisation and photo-fatigue behaviour of UV-sensitive photochromic systems produced using electrospinning.
Examines UV-sensitive photochromic materials made via electrospinning, focusing on their photo-fatigue behavior. Explores how material structure and composition influence light sensitivity and durability.
Published in Journal of Industrial Textiles, Volume 54
Direct experimental comparison of YSZ electrolyte fabrication approaches: powder compression and slurry casting.
Compares two manufacturing approaches—powder compression versus slurry casting—for yttria-stabilized zirconia (YSZ) electrolytes in solid oxide fuel cells. Highlights differences in microstructure, density, and electrochemical properties.
Published in Politecnico di Torino
3D Printing of Na1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte via Fused Filament Fabrication for All-Solid-State Sodium-Ion Batteries.
Introduces an additive manufacturing method (FFF) to produce solid sodium-ion conducting electrolytes. Discusses benefits in battery design and performance optimization through 3D printing.
Published in Batteries & Supercaps, Volume 7
3D-printed microstructured alginate scaffolds for neural tissue engineering.
Presents the fabrication of microstructured alginate scaffolds via 3D printing for neural tissue regeneration. Shows how customized pore geometry supports cell growth and tissue integration.
Published in Trends in Biotechnology, Volume 43
Degradation Effect of Moisture on Mechanical Properties of Kevlar/PVB Composites with TiO2 Nanoparticles.
Investigates how moisture affects the strength of Kevlar/PVB composites containing TiO₂ nanoparticles. Provides insights into long-term stability and possible improvement strategies against moisture.
Published in buildings, 2024
Humidity Resistant Biodegradable Starch Foams Reinforced with Polyvinyl Butyral (PVB) and Chitosan.
Presents the development of biodegradable starch foam reinforced with PVB and chitosan to achieve enhanced moisture resistance. Opens up possibilities for sustainable packaging and insulation materials.
Published in buildings, 2024
Ag-only inner electrode Na0.5Bi0.5TiO3-based X9R MLCC: achieving high performance and cost efficiency.
Describes the fabrication of multilayer ceramic capacitors (MLCCs) based on Na0.5Bi0.5TiO3 with silver-only inner electrodes. Focuses on achieving both high performance and cost effectiveness.
Published in Journal of Materials Science, Volume 59
Damage Resistance of Kevlar® Fabric, UHMWPE, PVB Multilayers Subjected to Concentrated Drop-Weight Impact.
Examines the resilience of Kevlar®, UHMWPE, and PVB multilayer structures under localized drop-weight impacts. Provides valuable insights for protective applications and safety equipment design.
Published in polymers, Volume 16
Fabrication framework for metal supported solid oxide cells via tape casting.
Outlines a process for producing metal-supported solid oxide cells (SOCs) through tape casting. Discusses optimization steps to achieve robust and long-lasting fuel cell structures.
Published in Journal of Power Sources, Volume 613
Impact resistance of aramid honeycomb tandem sandwich composites reinforced with TiB2.
Analyzes the behavior of aramid honeycomb sandwich structures reinforced with titanium diboride (TiB₂). Demonstrates how this addition enhances impact toughness and energy absorption.
Published in Composites and Advanced Materials, Volume 33
Controlling bacterial growth and inactivation using thin film-based surface acoustic waves.
Describes a method to regulate and inactivate bacteria using surface acoustic waves in thin films. Offers potential applications in medical technology and food processing.
Published in Lab Chip, Volume 24
Development of Flexible and Partly Water-Soluble Binder Systems for Metal Fused Filament Fabrication (MF3) of Ti-6Al-4V Parts.
Explores new binders that are both flexible and partially water-soluble for FFF-based manufacturing of Ti-6Al-4V parts. Focuses on improving process handling and subsequent debinding steps.
Published in polymers, Volume 16
Reducing Feature Size in Laser Implantation Texturing.
Presents methods for reducing feature size in laser implantation texturing. Enables more precise control of surface characteristics for micro- and nanotechnology applications.
Published in Micromachines, Volume 15
Studies on 3D printing of Na3Zr2Si2PO12 ceramic solid electrolyte through Fused Filament Fabrication.
Describes the additive manufacturing of Na3Zr2Si2PO12 ceramic solid electrolytes via FFF. Investigates process parameters to optimize electrical conductivity and microstructure for battery-related uses.
Published in Electrochimica Acta, Volume 503
Hybrid organic - inorganic filter system for cadmium ions adsorption from aqueous solutions.
Introduces a hybrid filter system that combines organic and inorganic components for effective cadmium ion removal from water. Shows promise for water treatment and environmental protection.
Published in Results in Engineerings, Volume 29
.
This website is intended as an information resource only. All information should be checked for its suitability for the intended use.
Call For Experience
Gurshranjit Singh
Technology Scouting
Phone: +49 69 305 85729
E-Mail: gurshranjit.singh@kuraray.com